- HOME
-
PRODUCTS
-
ELECTRICAL PROBE SYSTEMS
- ANALYTICAL PROBE STATIONS
- BENCHTOP PROBE STATIONS
- STANDARD MINI PROBE STAGES
- SPECIALTY MINI PROBE STAGES
- WAFER CHUCKS
-
THERMAL PLATES
- BENCHTOP THERMAL PLATES
- COMPACT THERMAL PLATES
- SPECIALTY THERMAL PLATES
- HALL EFFECT MEASURMENT
- ELECTRONICS PRODUCTS
- CONTROLLERS, COOLING SYSTEMS AND ACCESSORIES
- OPTICAL EQUIPMENT
-
LIQUID CRYSTAL SYSTEMS
- ALCT SYSTEM
- LC SYSTEM ACCESSORIES
- LC MATERIALS
- CUSTOM PRODUCTS
RESOURCES
SUPPORT
ABOUT
HCP421V-MPS Vacuum Chamber Probe Station
Tabletop design with small footprint integrates with modern instruments and benches
-190°C - 400°C (600°C option available, see HCP621G-MPS)
Fits up to Ø26 mm hexagonal thermal block (optional upgrade for larrger sample area available)
Sealed chamber with gas purging and/or vacuum capabilities
4+ independent electrical probes with remote mechanical positioning
Up to 7 probers available
TP SERIES THERMOELECTRIC PLATES
All-purpose laboratory thermal control
Sizes from 40 mm to 300 mm square
-30°C to 120°C
TEC cooling down to -30°C without cryogens
Optional gastight or vacuum-tight covers
SQUARE HOT AND COLD PLATES WITH GAS TIGHT COVERS
All-purpose labratory thermal plates
Gastight covers with optical access
Removable handles
50 mm to 300 mm square
-190°C – 600°C with LN2 cooling
SQUARE HOT AND COLD PLATES WITHOUT COVER
Benchtop thermal control workhorses
Open surface and slim design
50 mm to 300 mm square
-190°C – 600°C
HP1200G
High T microscopy & spectroscopy
Ø 16mm sample area
Gas purging capability
30°C - 1200°C
HP1500G
High temperature stage
Rotating sample observation window
30°C - 1500°C
Ø 7.5mm sample area
Gas-tight
TP102G
For long duration experiments
-40°C - 120°C
Sealed chamber with gas purging or vacuum capability
HCP621G
Compact Thermal Plate for microscopy and spectroscopy
-190°C to 600°C
Ø26 mm hexagonal sample area
Sealed chamber with gas purging capability
HCP421V
Reflection stage for microscopy & spectroscopy
Ø26 mm hexagonal sample area
Vacuum-tight chamber
-190°C to 400°C
HP600G-XRD
High temperature thermal stage with LN2 cooling specially design for x-ray measurements. X-ray diffraction and beamline configurations allow for easy use with most systems. Curved kapton window design allows for x-ray measurements over a broad range of diffraction angles.
HCP421V-ELP
Ideal for Ellipsometry
70° incident light angle and emergent light angle
-190°C to 400°C
Ø30 mm sample area
Vacuum-tight chamber
HCP621G-ELP
Ideal for Ellipsometer
70° incident light angle and emergent light angle
-190°C - 600°C
Ø30 mm sample area
Sealed chamber with gas purging capability
HCP600G-CAP
Ideal for Capillary tube
travel capillary tube for remote manipulation in closed chambers
-190°C - 600°C
28 mm × 30 mm sample area
Sealed chamber with gas purging capability
HP1100XR - 1100°C HOT PLATE FOR X-RAY REFLECTION
1100°C high temperature
φ360° azimuth angle
Graphite dome cover
Sample size 15x15mm
TP102LC4
The TP102LC4 allows temperature-controlled Automatic Liquid Crystal Testing (ALCT) measurements to be made with low electrical noise and low leakage. Four cells can be loaded into the TP102LC4 for properties testing while maintaining a constant chamber temperature (opening the lid between samples is not required). This chamber is designed specifically for use with Instec’s S-type and SG-type LC cells. When used together with guarding cells (SG-type), a voltage can be applied to the guarding electrode to reduce parasitic capacitance and enhance measurement accuracy